Cotol-240™ Directions for use with Seam Grip® or Freesole® Urethane Repair Adhesive and Sealant:

AS PRECLEANER:

1. Apply a small amount to the damaged area (spot test for colorfastness).
2. Rub with a clean cloth until dry.
3. Repeat steps 1 and 2.
4. Apply Seam Grip or Freesole as directed.
   Note: for best adhesion, first roughen non-fabric surfaces with sandpaper.

AS CURE ACCELERATOR:

1. Thoroughly mix 1 part cure accelerator with 3?4 parts Seam Grip® or Freesole® using a stick, toothpick, or knife. Mix on a non-absorbent surface such as a plastic lid or plate.
2. Immediately apply the mixture to the damaged area.
3. Allow the repair to completely cure at least 2 hours before using.

FOR COLORS: Mix food coloring or paint colorant (available at paint stores) into the Aquasure and cure accelerator before applying.

CLEAN-UP: To remove Seam Grip® or Freesole® from hands, use cloth soaked with paint thinner, nail polish remover or 99% isopropyl alcohol.

STORAGE: Cap tightly. Store in cool, dry place. Use blister card package for storage.